Photonics West 2024

Photonics West 2024 Preview

Explore the Leonardo Electronics US booth and connect with our team.

Schedule a time to meet

 

Technical Session

Compact-Lightweight Fiber-Coupled Diode Pump Source Using a Bar Approach

January 30 at 9:50 am | Moscone Center, Room 205 (Level 2 South)

Presenter: Jenna Bergevin, Leonardo Electronics US Inc.

Abstract: The size and weight of a fiber laser source are important metrics. A bar approach has the potential for making a lighter, more compact apparatus. We will show results from the development of a bar-based fiber coupled diode source resulting in approximately 500W of power from a 231 um core 0.22 NA fiber, wavelength locked at 976 nm. The resulting weight metric is 0.38 g/W and volume metric 0.30 cm3/W, the lowest such values for comparable power fiber-coupled diodes to the best of our knowledge.

Add to My Schedule

 

Aging Mechanisms of Broad Area High-Power Approximately 800 nm Laser Diodes

January 28 at 3:40 pm | Moscone Center, Room 205 (Level 2 South)

Presenter: Elaine McVay, Lawrence Livermore National Lab. (Co-authored with Leonardo Electronics US)

Abstract: The effect of oxygen defects on the gradual degradation rates of power and nonradiative carrier recombination in ~800 nm laser diodes was studied experimentally. While intentional introduction of oxygen at low levels (<5×10^15 cm^-3) was observed to degrade lasing performance prior to aging, no variation in gradual degradation rate of lasing power was observed. This suggests that degradation in these devices is not due to nonradiative recombination at low levels of point defects. Simulation of our data indicates that the power degradation may arise from increased intracavity absorption.

Add to My Schedule

 

Products Displayed at Photonics West

conductively cooled

Laser Diode Arrays

Conductively Cooled

  • Up to 1.5 kW peak output power with a 350 μm tightest pitch.
  • Multi-wavelength, custom geometries & wavelength selections from 760 - 1700 nm.
  • Compact, reliable, robust, and scalable
  • Target Markets: Industrial and Defense

Explore our laser diode product configuration tool.

T6_Web

Laser Diode Arrays

Fluid Cooled, T6

  • 760 nm to 1700 nm
  • > 2.5 kW output power (CW or Pulsed)
  • Multi-Wavelength Arrays Available
  • Lightweight and Compact Design
  • Housing Optional
  • Stackable
  • Target Markets: Medical, Industrial, Green Energy, Scientific and Defense
Megawatt

Scalable Modules

Pump Source for High Peak Power Laser Systems

  • 8xx nm
  • MW-Class Power
  • 100s us
  • ~ 1% Duty Cycle 
  • Target Markets: Industrial, Green Energy, Scientific and Defense
F8-1

Fiber Laser Components

Fiber Coupled, F8

  • Provides over 500 W of output power from a 225 µm fiber core.
  • Stabilized wavelength, designed for 20,000 operating hours.
  • Target Markets: Fiber Laser Pumping, Industrial, Medical, and Defense
Fiber amplifier_resized web

High Power Fiber Amplifier

Fiber Amplifier, A20

  • Ideally suited for spectrally combined lasers providing an output power of 2.5 kW in a delivery fiber.
  • Designed with pump diodes that provides a military ruggedness that is not seen with other fiber amplifiers.
  • Single wavelength range: 1050 - 1080 nm
  • Target Markets: Fiber Laser Pumping, Industrial, and Defense

Read our blog: Advancing the High-Energy Laser Technology Roadmap.

EPAC_side-view

Laser Diode Systems

Homogenized Pump System

  • 35 J per pulse at 10 Hz
  • 29-57 kW pulse at 10 Hz
  • > 96% of power homogenized
  • Integrated system with remote control capability
  • Compact design 
  • Target Markets: Pumping of high-energy lasers and amplifiers, Scientific, and Industrial

Read our white paper: High Power Pump Diodes for Petawatt.

Contact Our Team of Experts