Type 163

Laser Target Designator
with Laser Rangefinder

The battle-proven Type 163 laser target designator is designed specifically to meet all of today’s special and conventional force JTACs and JFOs mission requirements for marking and terminally controlling semi-active air-to-ground weapons accurately onto the target at ranges up to 10km.

At less than 2.5 kgs (5.36 lbs) with battery, it typically provides >80 mJ per pulse for up to 40 mins* with no duty cycle required. Full NATO STANAG 3733 Band I & II compatible with all PRF codes pre-loaded and ready for operation. Its size and simple operation allow rapid deployment and engagement. Switch on to fire in less than 3 seconds**.

A wide variety of employment factors and conditions affect the quality of laser spots presented to both modern and legacy laser spot trackers and seeker heads by ground-based laser target designators. These include slant range, altitude of electro-optic targeting system and/or weapon seeker, solar load, target reflectivity, smoke, haze, and LTD range to target.

The Type 163’s combination of superior power coupled with excellent beam divergence and bore sighting helps mitigate these employment limiting factors.

This allows a JTAC or JFO employment flexibility to meet a wide range of mission sets (short, medium, and long-range) when conducting laser spot hand-off and/or terminal guidance.

* Continuous lasing at low PRF (20 Hz) in ambient temperature
** PRF Code already programed

Request for Quote
Type 163

 

Feedback from Type 163 combat employment is that JTACs can designate with a high degree of confidence, reducing communications and increasing first attack hit probability. Additionally, employing the Type 163 reduces fratricide and collateral damage risks inherent in air-to-ground operations.

Designed from user feedback for a small lightweight with high power (SWaP) designator, the focus has been on a laser that is simple and easy to operate yet rugged and reliable. This has been achieved by incorporating the latest diode-pumped technology along with Nd:YAG slab configuration, a thermal resonator, active q-switch, and high-efficiency heat exchangers resulting in the Type 163 laser offering full performance over a broad operating temperature in a package suitable for military use.

The laser is designed to support a modular and separable approach to target acquisition and sensor equipment. This provides maximum flexibility in mission planning and importantly helps to minimize individuals’ carrying load. A serial comms port is provided for integration with Digital Aided Close Air Support (DACAS) systems, GPS, or optical See Spot equipment if required.

  • Key Features
  • Typical Specifications
  • Small and lightweight with high power
  • Easy to train, simple to operate
  • No complicated menu structures to remember
  • Low beam divergence
  • Detection range up to 10 km
  • No significant warm uptime
  • Quiet operation for covert use
  • Continuous lasing, no duty cycle
  • Serial out comms port
  • Low maintenance and low life-cycle costs
  • Picatinny rail to allow mounting of external equipment

T163 (rear)


 

Equipment

  • Type 163 LTD Laser Target Designator
  • Remote arm/ fire control switch
  • Lithium-Ion battery x 2
  • Power adaptor charger
  • Field carry pouch

 

Optional

Tripod fine adjust, interface plate and carry pouch BA5590 battery adapter

T163 (front)

  •  Output energy: > 70 mJ (typically >80 mJ)
  • Pulse width: 18 ±7 ns
  • Repetition rate: NATO STANAG 3733
  • Beam divergence: < 300 µRad (typically <200 μRad)
  • Direct view optics: 10x Magnification, 2° Field of View, Open Cross Reticle
  • Laser rangefinder: 100m to 9.999 km ±5 m (first/last pulse logic)
  • Dimensions (l x d x h): 322 mm x 142 mm x 87 mm (12.7’’ x 5.6’’ x 3.4’’) including battery and eyecup
  • Mass: < 2.5 Kg including battery (5.36 lbs)
  • Comms out: RS422/RS322
  • Power supply: Rechargeable battery pack
  • Rechargeable battery duration: Typically >20mins (>15 mins at max PRF and continuous operation)
  • Temperature
    • Operating: -30 to +50°C (-22 to +122°F)
    • Storage: -40 to +85°C (-40 to +185°F)
  • MTBF: 12,000 hrs (Mil-Hdbk-217 prediction)

Your Laser Starts Here

Partnering with Leonardo Electronics US will help your team find solutions to your biggest challenges.
Customize Your Solution